|
Location :: Products -> Leather Tanning
-> Anchrome-50 |
|
ANCHROME - 50
CHEMICAL CHARACTER : Basic
Chromium Sulphate |
|
ANALYTICAL DATA |
|
Cr2O3 |
: |
24.0% + 0.5% |
|
Basicity |
: |
50% + 1% |
|
Neutral Salts |
: |
30% + 2% |
|
pH of 6% Solution |
: |
3.4 + 0.2 |
|
Moisture |
: |
10% + 0.5% |
|
|
|
PROPERTIES |
|
ANCHROME-50 is a powder easily soluble in cold water and highly soluble
in hot water.
It
contains compatible additives to help fast penetration and better
exhaustion. The product is made in such a way as to ensure a high
degree of solubility in cold water. The tanner has the obvious
advantage of controlling his masking by the addition of suitable masking agents.
The basicity variation from batch to batch is very minimal and one can be
assured of a starting material of standard basicity. |
|
APPLICATION |
|
Because of the ease of solubility, this can be used in dry tannage or
floatless tannage without any problem and used for tannages where
definite floats are employed. Since they are not masked , the tanner
can add the requisite amount of masking agent which has the advantage
of controlled and uniform dyeing at the later stage. As such, when
used, it gives an optimum bluish green colour and uniform tanning is
achieved. |
|
PACKING
|
|
Available in 25/50 Kgs. Packings.
Packed in Kraft Paper Bags / HDPE Woven bags with an additional inner
polythene liner. |
|
(The above
procedure outlined is for guidance only and is without obligation) |
|
|
|
|
|
|